Facet5 Technical Review

These pages are designed to provide convenient access to technical information about Facet5. They follow the guidelines provided by the British Psychological Society for the review of psychological tests. For more detail on these guidelines you should visit the BPS web-site at http://www.psychtesting.org.uk.

This site contains the most current information about Facet5 and is updated on a regular basis. Due to the dynamic nature of Facet5, it is likely that information on this site will be more current than that held in printed manuals or other technical studies.

For further information about Facet5 please refer to the Facet5 distributor in your area or email admin@facet5.net or admin@facet5.com.au.

Back to top


Instrument name

The full name of this product is: Facet5

The name Facet5 is a protected trade-mark as follows:

EU: 1573797

Australia: Applied for.

An early version of this profile was marketed under the name of "Insight" from 1990 until approximately 1992.

Back to top


Authors of the original instrument

The copyright to Facet5 is held by the authors. The authors are:


Norman Lee Buckley

Norman Buckley graduated in Psychology in Sydney and gained his initial experience with a consulting organisation in Australia. From 1978 he ran his own company in the UK, during which time he pioneered the use of custom built assessment and development processes and worked extensively on biographical and personality data analysis. More recently he built on ten year's research in personality theory and developed Facet5, which was the first major advance in personality assessment in the EU in the past ten years. Now Facet5 is one of the few fully web-enabled approaches to personality measurement and incorporates cutting edge technology specially designed for the web. Facet5 forms part of a range of individual and corporate diagnostic tools covering individual differences, leadership development, corporate culture and environment scanning.

He has extensive experience of psychometric methods and is an expert in questionnaire design and assessment techniques. He has created numerous assessment and development centres, trained management in structured interview techniques and delivered programmes of management assessment, counselling and development. He worked for many years as a consultant to newly privatised companies especially on Leadership development with government scientific research body as they transformed to become a commercial entity.

He has presented papers to International Test Commission, the Australian Psychological Society and the British Psychological Society. He travels extensively to support business partners in the EU, USA, South America and Asia Pacific and is a regular speaker at professional conferences. He recently published a paper on the use of Response Latency Analysis for detecting Impression Management in web-based questionnaires.

His clients include consultancies, multi-nationals in the pharmaceutical, manufacturing, retail, aviation, cosmetics, food and tobacco sectors, as well as Central and Local Government Departments and education.

In 1999 Norman returned to Australia and is now applying his experience in the Australian market. He is continuing to work on the development of Facet5 and integrating web-based processes for 360-degree review and high volume on-line assessment. These processes are currently being translated into a number of major languages to allow simultaneous use of Facet5 and all its extensions across the world in multiple languages.

Back to top


Rebekah Justine Williams

Having graduated in psychology, Rebekah began her career in the clinical field. She specialised in puerperal psychosis and over a period of ten years contributed to research and the treatment of the disorder. During this time she was also very active in the Women's Health movement and was instrumental in setting up and running the first two Well Women clinics in Manchester, UK. She worked as a Counsellor for the Clinics and promoted the establishment of the first community based self-help groups attached to GP practices. Towards the end of her clinical work, Rebekah was seconded to the Medical School to work with trainee GP's on the development of doctor patient communication programmes.

She transferred to the field of business psychology in 1987 and completed a second Masters in Organisational Psychology at UMIST. From here she moved through a number of consulting assignments associated with major organisational change/restructuring programmes. She developed specific expertise in the design and delivery of corporate climate surveys and team leader assessment and development programmes.

Rebekah joined Redfield in 1996 to work on the development of a unique range of personal development processes. During this time she also delivered many individual and team development programmes for both UK and Continental European clients. Her work ranged from individual assessment through leadership development and teambuilding to the design and delivery of training programmes to transfer complex knowledge and technology to Redfield's clients.

Redfield moved its operations to Australia in 2000 and Rebekah relocated to Sydney as a Director. She has continued to be involved in product development, training and consulting to a growing number of large and small Australian clients. She travels extensively to support Redfield's work in Europe, South America and the USA.

Back to top


Acknowledgements

In addition we received considerable support from Dr Chris Brand formerly of the University of Edinburgh Department of Psychology. He contributed valuable comments and made available much of his original research in this field. Ian Fraser helped shape the original Facet5 concept from a theoretical framework to a practical tool. Nicky Hayes contributed greatly with her review and précis of the original literature and her ability to see through the complexities when I couldn't. Bob Stewart's extraordinary ability to link personality theory, psychometrics and computer programming has been invaluable in taking Facet5 from a concept to a working tool.

Phil Lindsey added further comment and refinement. Valuable insights have been provided by Janet Taylor and Claire Whittington, contributing from both a very broad philosophical perspective and from their practical insights. Finally we must acknowledge the many Facet5 users over the years that have helped to clarify what specific Facet5 profiles mean in the work place. Some of them have seen fit to comment on the way in which they have found Facet5 helpful (click here for testimonials)

Back to top


Local instrument distributor/publisher

Facet5 is distributed in Australia by the publisher, Redfield Consulting Pty Ltd. EU and US distribution is managed by:

Consulting Tools Limited

20 Chishill Road
Heydon
Royston
Herts.
SG8 8PW
United Kingdom
+44 (0)1763 836310
info@consultingtools.com
www.consultingtools.com

Sub-distributors for Facet5 are listed at www.consultingtools.com

Back to top


Publisher of the original version of the instrument

Facet5 is published by:

Redfield Consulting Pty Ltd
Level 22/201 Miller Street
North Sydney
NSW 2060
Australia
Tel: +61 2 9025 3776
Fax: + 61 2 9025 3777
info@redfieldconsulting.com

Back to top


Publication Date

Facet5 was first published in the UK in 1990 and the working concept was presented at the BPS Occupational Psychology Conference held at Bowness on Windermere in January 1990. The structure of Facet5 was outlined in the paper by the primary author titled "The Magical No 5: Towards a Theory of Everything"

Back to top


Content domains

Facet5 is designed to measure personality traits using a statement based normative format. 106 statements are arranged as semantic differentials. Scores are produced on 5 main factors and 13 sub-factors and is based upon Big 5 theory. In addition Facet5 assigns a profile to one of 17 Facet5 Families which can be seen as pseudo types. However since the underlying factors are continuous and normally distributed, this "typology" is a convenient way of describing a pattern of scores rather than a suggestion of "type" as such.

It is also possible to extract core motivations and work related interests from the Facet5 profile.

The factors and sub-factors measured by Facet5 are:


Will
Determination
The inner drive to commit to own ideas


Confrontation
A drive to confront issues as they arise


Independence
A tendency to go your own way

Energy
Vitality
Obvious enthusiasm and energy


Sociability
Interest in being with people


Adaptability
Involving other's in your thinking

Affection
Altruism
Putting other people's interests first


Support
Always trying to be understanding


Trust
Tendency to take people at face value

Control
Discipline
Being personally organised and planned


Responsibility
Being willing to take personal responsibility

Emotionality
Tension
A general sense of tension or stress


Apprehension
Being cautious and not over-optimistic

For a full description of these domains you should refer to the Facet5 User Manual, Section 4.

The rationale for these major domains can be seen in a table which compares different psychological models and shows the similarities and differences.

Back to top


Intended areas of use

Facet5 is a "broadband" model, the output from which has been specifically designed for organisational/occupational use. The basic output is the Facet5 Profile which provides all the base information from the Facet5 scores. This includes Sten Scores for 5 main and 13 sub-factors, Response distortion data and summary interpretations of the data. Click here for a sample.

In addition there are four distinct application areas within this domain and each is supported by one of more unique application modules. They are:

Recruitment:

There are two elements within the Facet5 system designed to support the recruitment/selection process. Leading and Managing:

This is supported by two elements - Leading Edge and the Strategic Leadership Review. Both are underpinned by a 7 element model of leadership based on the work by Bass & Alvolio, Quinlan and others. Integration:

In the Facet5 model, understanding the effect of introducing a new person to a team or changing the make-up of a team is critical. The Facet5 system provides guidance here through: Development:

Longer term guidance for individuals requires some understanding of their core work based motivation. Facet5 does not attempt to uncover core motives in a Maslowian or similar sense but instead concentrates on personal predilections inferred from the core model. These are captured in: Back to top


Intended populations

Facet5 was created to provide valid information at the managerial and professional level. The original development sample was split 70:30 (Male to Female) which broadly represents the working population in Western countries. Most were educated to High School graduate (A'level, Baccalaureate, Higher School Certificate etc) standard and the majority were in the age range from 20 to 45. These are broadly the characteristics of the Managerial and Professional working population in Western countries.

However there have been numerous cases where Facet5 has been applied outside this intended population. Numbers have been insufficient to allow a detailed analysis of any sample based response bias but no reading level problems have been reported. Facet5 was in fact designed to minimise the use of idiom or slang and the reading level was designed to be relatively low. The Flesch Kincaid Readability Index for the Facet5 Questionnaire items is 6.4 indicating that an US 6th Grade student should be able to comprehend it.

Our advice is generally to apply Facet5 with confidence in the population for which it was developed and normed. Should there be a pressing need to use Facet5 outside this norm base then proceed with caution and contact the authors for advice.

Back to top


Number of scales and description of the variables

Facet5 is designed to measure 5 major personality factors and 13 sub-factors and is based upon Big 5 theory. The factors and sub-factors measured by Facet5 are:


Will
Determination
The inner drive to commit to own ideas


Confrontation
A drive to confront issues as they arise


Independence
A tendency to go your own way

Energy
Vitality
Obvious enthusiasm and energy


Sociability
Interest in being with people


Adaptability
Involving other's in your thinking

Affection
Altruism
Putting other people's interests first


Support
Always trying to be understanding


Trust
Tendency to take people at face value

Control
Discipline
Being personally organised and planned


Responsibility
Being willing to take personal responsibility

Emotionality
Tension
A general sense of tension or stress


Apprehension
Being cautious and not over-optimistic

For a full description of these domains you should refer to the Facet5 User Manual, Section 4.

The rationale for these major domains can be seen in a table which compares different psychological models and shows the similarities and differences.

Back to top


Item format

Facet5 consists of 106 items. Each item is arranged as a "Semantic Differential" following the example of Osgood and Suci. Further explanation of the Semantic Differential format can be found in the Facet5 User Manual, Section 3 page 3.

Although the respondent is asked to choose between mutually exclusive alternatives, each pair of alternatives represents a single scale. The format is therefore fully normative. This is fundamentally different from the case where people are asked to choose between mixed-scale alternatives (Ipsative format) with its inherent statistical problems. For a description of some of these see Johnson, C.E., Wood, R. & Blinkhorn, S.F. (1988) Spuriouser and spuriouser: The use of ipsative personality tests. J. Occupational Psychol. 61, 153-162.

Left hand item stems are right justified and right hand item stems are left justified in order to maintain a constant visual distance between the statement and the scale.

Back to top


Number of items

Facet5 consists of 106 semantic differential scales. Some people have suggested that this format can actually be unpacked to show 212 Likert scales but since each pair is antonymous this argument would appear to be spurious.

Of these 106 scales, only 83 are actually used to create the Sten Scores. The others are used as placeholders for research items. Facet5 is under constant revision and having un-scored place holders allows us to trial new items as and when we wish without affecting the scoring of the existing items since since order effects remain constant.

Back to top


Administration mode

Facet5 is a fully web-enabled process. As such administration requires web-access but beyond that the specific mode is up to the user. The following modes are all possible:

In addition, although not recommended, it is possible to administer Facet5 using a paper based format. Therefore both:
are possible should it be desired.

Back to top


Response mode

Facet5 is designed to capture responses directly into the system. When the user logs onto the system (via secure userid and password) the Facet5 questionnaire is downloaded to the user's browser as Java script. There is no further communication between the browser and the server until either the respondent chooses to perform an intermediate "Save" or has completed the questionnaire. At this time the raw data is transferred to the server as an encrypted string.

Note: if the user has chosen to administer by paper then the browser only downloads a simple screen for data entry. Upon completion the data string is again transmitted to the server.

Back to top


Time required

Administration, including preparation and set up

Facet5 is extremely quick to administer. Authorised users need to log on to the Facet5 system using an assigned USERID and PASSWORD. They then enter the name, demographic details (if required) and email address for the respondent. They have the option of modifying the invitation email on the fly if required but then click on "Send Email Invitation". The email is automatically sent to the respondent and the system waits for a response.

Upon receiving the completed responses, the system notifies the authorised user by email that the respondent has completed the questionnaire.

Total administration time, including log on, creation of new respondent record and sending emailed invitation is approximately 2-3 minutes.

Time allowed for answering the items

Facet5 is un-timed and respondents are not put under any pressure to complete in a particular timeframe. They are advised to try and answer spontaneously and not to think too deeply about any one question.

Research has demonstrated that the original paper and pencil version took approximately 25 minutes to complete on average. The switch to item by item test administration via the web has reduced this completion time to approximately 17 minutes on average.

Scoring, analysis and report generation

Since Facet5 is fully web-based, all scoring and report generation is carried out immediately upon receipt of the raw data from the respondent's web-browser.

De-briefing or feedback.

Time taken to provide adequate feedback can obviously vary according to the situation. Where Facet5 is used in a very focused way (concentrating on specific competencies for example), feedback may be quite brief. For such purposes we have created the Facet5 Family Portrait which is a computer generated report providing a simple overall summary of the score pattern. Such feedback can be conducted in approximately 30 minutes.

Where more comprehensive feedback is required (eg development, counselling, career guidance) then more thorough use of the raw data is recommended which would extend the recommended feedback time to at least one hour.

When Facet5 is linked with multi-rater feedback (for example when it includes the Strategic Leadership Review), then feedback would normally extend to 2 hours or more.

Back to top


Parallel forms

There are no parallel forms for Facet5. However it does exist in multiple languages. At present Facet5 can be completed in:
Translations are currently under way into Chinese (Mandarin), French, and Spanish.

Back to top


Software/Hardware requirements

Facet5 has no specific hardware requirements. Browsers need to be able to support dynamic HTML and Java script needs to be enabled. If Cookies are enabled, Facet5 will make use of them to allow the respondent to partially complete the questionnaire and return at a later stage.

This means that Facet5 requires Internet Explorer (version 5 or higher) and Netscape (V6 or higher). While we have seen Facet5 running on Mozilla and Opera, it has not been fully tested on these platforms. There are known problems running Facet5 on Firefox.

Facet5 requires Adobe Acrobat Reader for accessing fully formatted .pdf reports.

Back to top


Measurement and scoring

All scoring is computer based with direct entry of responses by respondent. No intervention is required from the administrator. Appropriate norms are selected by default but can be changed by the administrator when the email invitation is sent. The norms applied can also be changed after the data has been processed.

Should it be necessary it is also possible to apply computer scoring with manual entry of responses from the paper response form.

Finally, there is a Bureau-service available where profiles are scored from faxed answer sheets.

Although the scoring is automatic, the steps it goes through are as follows:

Back to top


Step 1: Calculation of Raw Scores.

Facet5 items have "simple structure" in that each item loads on only one domain. The number of items loading on each item are:

Will: 15

Energy: 15

Affection: 18

Control: 17

Emotionality: 18

Within each domain items are balanced for polarity so that the "high" end is sometimes on the right and sometimes on the left. This is to avoid obvious left-right response bias. Where necessary, items are reversed to provide consistent polarity.

This provides raw scores that are linear sums of the responses for each domain.


Step 2: Conversion to Sten Scores:

Once we have the Raw Scores we can convert them to Sten scores. To do this the Raw score mean (calculated from the research sample) is subtracted from the Raw score and then the whole is divided by the standard deviation. This leaves a Z-score which has a mean of 0.0 and 95% of the cases will lie between -1.96 and +1.96. This is then converted to a Sten Score (standing for Standard Ten) by multiplying by 2 (Sten scores have a Standard Deviation of 2 so the SD needs to be doubled) and than adding 5.5 which moves the whole scale up to an average of 5.5. This is shown below.


Finally any extreme scores which are either below 1 or greater than 10 are truncated to 1 and 10 respectively. This is done for each Facet5 scale in turn. It is these scores which are reported by Facet5 although for research work it is more appropriate to use the original raw scores.


Step 3: Calculating Sub-Factors

Facet5 sub-factors are factor scores based on analysis of the factor structure of the items loading on each main Factor. Sub-factor scores are calculated as weighted linear sums where the weights applied to each item are derived from the original factor analysis. These scores are also converted to Sten Scores.


Step 4: Adjusting sub-factor scores

There is one final adjustment to the sub-factor scores. Since the main factor scores and the sub-factor scores are calculated using different processes, the average of the sub-factors was not equal to the main factor score. This is perfectly logical since each sub-factor accounted for a different proportion of the total variance. It was possible to get the sub-factor scores to average to the main factor score by weighting them by the proportion of variance accounted for but this became impossible to explain to statistically inexperienced recipients. We therefore decided to adjust the sub-factor scores post-calculation so that they did average out to the main factor score. In each case the adjustment was small and we maintained the ratio of one sub-factor to another.


Step 5: Assigning profiles to a Facet5 family

The final step is to decide which Facet5 family the profile belongs to. There are 17 reference families and the Facet5 system simply calculates a similarity co-efficient for each of these 17 "reference" families. The metric used is a simple Euclidean DSQ. For example the reference profile for a "Promoter" has Will and Energy at 7.5, Control and Affection at 3.5. DSQ for this is calculated as follows:

DSQ = SQRT()

It should be noted that the DSQ is calculated using only the 4 main factors. Emotionality is excluded since it is defined as an interpreting factor, qualitatively different from the other 4.

The profile is allocated to the family where the DSQ is lowest, indicating that the overall profile is more similar to that family than to any other. It should be noted that the Facet5 system includes a link labelled "Close Relatives". This link shows, graphically by means of an overlay, how close the respondent's profile is to the assigned family and also shows the next two closest fits.

Note: We are currently reviewing the similarity metric used to assign profiles to families. The first step will be to normalise the DSQ (by dividing by the maximum possible DSQ) which has the advantage of constraining the metric to between 0 and 1. This will be reported as a percentage. Our next approach will be to subtract the DSQ from 1. This is because a high DSQ (for example 75%) actually indicates "Dis-similarity". We believe users will find it more intuitively useful for high numbers to indicate "Similarity". As a result of these changes the metric reported will range from 0% to 100% with 100% indicating perfect Similarity. This follows the comments made by Paul Barrett in a paper to the NZ Industrial and Organizational Psychology Conference in 2003 titled "Person Target Profiling for Selection & Recruitment". This paper examines the effect of Score Elevation and Score Scatter on a number of different similarity/difference coefficients.

Back to top


Impression Management

In addition to the main Facet5 scoring process, the system also calculates measures of response bias. There are two which are used: Response Pattern and Response Latency. Full details of these measures are given in the paper "Response Patterns and Impression Management", paper delivered to the ITC Conference, Winchester, June 2002.

Back to top


Computer generated reports

A number of computer generated reports are available. They include:


Facet5 Profile

Description

The Facet5 Profile provides all the raw Facet5 data along with Impression Management statistics in a fully developed format combining text and high quality graphics.

A sample of this report can be seen here.

Media - Integrated Text and Graphics

This report is available either in the form of web screens or as a fully formatted .pdf. The Profile uses integrated text and graphics.

The report included graphics and data for all 5 main factors and 13 subfactors. It also includes the Impression Management statistics. The web system allows for "drill down" from main factor through sub-factor to representative items if required.

Complexity

Some text is fixed (e.g. the descriptive anchors at the ends of the scales) while some is dynamic and linked to the pattern of scores obtained. Reports are scale/factor based and are "in between" in that they incorporate suggested analyses of patterns of Facet5 factor and sub-factor scores.

Report structure

This report is both Scale and Factor based.

Sensitivity to context

There is one version of this report for all contexts

Clinical-actuarial

The written content of the Facet5 report was created over a period of time by the authors with considerable support from peers and colleagues. They are therefore "clinical judgement" by a group of experts.

Modifiability

The .pdf's a not easily modifiable (although they can be with appropriate software). However the web based data is presented as pure HTML and is therefore completely modifiable/editable if required by anyone with user level access to the profile.

Degree of 'finish'

Facet5 reports (as .pdfs) are designed to be "publication" quality. With appropriate quality colour printing they are ready to be bound and presented. Obviously the .pdf itself can be transmitted electronically to the point of delivery.

Transparency

The fixed text provides a clear indication of the behaviours likely to be found at the top and bottom ends of the scales. There is an obvious graphical link between the scores and the text. The closer the result is to the end of the scale the more appropriate the comments will be.

The link between the scores and the dynamic text is less obvious. For example each set of sub-factors gives rise to a descriptive comment. The driver for this is the pattern of sub-factor scores. To decide which description to use the system recodes the sub-factor scores into High, Medium and Low (<4, 4-7, >7) giving a three element index. This index (eg, HHM for High, High and Medium) is associated with a descriptive paragraph. This methodology is explained during training so is clear to trained users but may not be obvious to respondents without explanation.

Style and tone

The Facet5 report is descriptive only. Guidance is provided by the additional, situation specific reports.

Intended recipients

Qualified instrument users either use the Facet5 Profile to support their own feedback and reporting or take the content from the web and re-work it for their own specific purposes.

Qualified system users use the Facet5 Profile as the benchmark for their own feedback. They will tend to refer to it during feedback and use it as a framework.

Test takers are usually given the Facet5 Profile after feedback along with whatever other information is generated. It is written in "normal" language that respondents can identify with. There is no use of jargon or slang. Users are strongly advised against giving a Facet5 Profile to the respondent without full structured feedback.

Third parties can use the Facet5 Profile if they have gained either specific training or incidental experience with the model. Untrained third parties are specifically forbidden from providing feedback to respondents.

Back to top


Family Portrait

Description

The Family Portrait provides an interpretation of the overall pattern of Facet5 factor scores. As such it attempts to integrate the influences from each factor to provide a broad description of likely behaviour under 5 main headings:
Each commentary is provided as bullet points. Under each heading we maintain a 2:1 balance between positive and negative statements so that overall the Family portrait presents a positive picture of the respondent.

Although the Family Portrait is not anodyne in its commentary, the positive overall flavour is such that it is unlikely to cause offence to respondents. Therefore should the situation arise where the report is provided to the respondent without appropriate feedback (and we know this happens in spite of strong recommendations to the contrary), little harm will be done.

A sample of this report can be seen here.

Media - Integrated Text and Graphics

The Family Portrait shows the overall Facet5 Profile (without sub-factors) and, for comparison, the reference profile for the "Family" to which the respondent has been assigned. Text is provided in bullet form for clarity.

Complexity

The whole report is based on a pattern analysis of the Facet5 Profile and a subsequent linking to the Facet5 Families. All text therefore relates to the assigned family.

Report structure

The report is construct based under the headings mentioned above. The only variation is when Emotionality is extreme (high or low) when additional comment is added to flavour the behavioural descriptions.

Sensitivity to context

There is one version of the Family Portrait designed for general application.

Clinical-actuarial

The written content of the Facet5 report was created over a period of time by the authors with considerable support from peers and colleagues. They are therefore "clinical judgement" by a group of experts.

Modifiability

The .pdf's are not easily modifiable (although they can be with appropriate software). However the web based data is presented as pure HTML and is therefore completely modifiable and editable if required by a user with appropriate access to the system.

Degree of 'finish'

Facet5 reports (as .pdfs) are designed to be "publication" quality. With appropriate quality colour printing they are ready to be bound and presented. Obviously the .pdf itself can be transmitted electronically to the point of delivery.

Transparency

The content of the Family Portrait is based on the Family structure. Fully trained Facet5 users will be completely familiar with the source of the report commentary. A respondent will need to have these links explained to them during feedback.

Style and tone

The Family Portrait is both descriptive and provides guidance. Four bullet points provide pure description (e.g. "Is ambitious and goal-oriented") while two are suggestions (e.g. "May tread on others' toes").

Intended recipients
Back to top


Searchlight

Description

Searchlight is designed to take the Family structure and to then provide competency based descriptions under six broad competencies.
As with the Family Portrait, each commentary is provided as bullet points. Under each heading we maintain a positive balance between positive and negative statements so that overall Searchlight presents a positive picture of the respondent.

Searchlight is designed as a guide to behaviour based interviewing. Therefore it provides specific guidance to the interviewer in terms of "What you should expect" and "What you should look out for". It is expected that users will be familiar with behavioural interviewing techniques and will construct questions using the Searchlight pointers as anchors.

A sample of this report can be seen here.

Media - Integrated Text and Graphics

Searchlight shows the overall Facet5 Profile (without sub-factors) and, for comparison, the reference profile for the "Family" to which the respondent has been assigned. Text is provided in bullet form for clarity.

Complexity

The whole report is based on a pattern analysis of the Facet5 Profile and a subsequent linking to the Facet5 Families. All text therefore relates to the assigned family.

Report structure

The report is construct based under the headings mentioned above.

Sensitivity to context

There is one version of Searchlight designed to provide a guide to interviewing.

Clinical-actuarial

The written content of the Facet5 report was created over a period of time by the authors with considerable support from peers and colleagues. They are therefore "clinical judgement" by a group of experts.

Modifiability

The .pdf's are not easily modifiable (although they can be with appropriate software). However the web based data is presented as pure HTML and is therefore completely modifiable or editable if required by a user with appropriate level of access.

Degree of 'finish'

Facet5 reports (as .pdfs) are designed to be "publication" quality. With appropriate quality colour printing they are ready to be bound and presented. Obviously the .pdf itself can be transmitted electronically to the point of delivery.

Transparency

The content of Searchlight is based on the Family structure. Fully trained Facet5 users will be completely familiar with the source of the report commentary. An interviewer does not need to fully understand the relationship between the comments and the underlying Facet5 profile but will obviously do a better job it they do. A respondent will need to have these links explained to them during feedback.

Style and tone

Searchlight is both descriptive and provides interview guidance. For example a description under "Leadership" might be "Is demanding with a strong sense of purpose". The linked suggestion is therefore "Watch for being unsympathetic"

Intended recipients

Qualified instrument users tend to use parts of the Searchlight to help structure the competency section of a written report. The competencies are generic but are frequently found in organisation's competency structures so may require little modification to fit.

Qualified system users use the report as is and construct an interview process around the Searchlight guidelines.

Test takers can use Searchlight as an "aide mémoire" to the interview and feedback discussion.

Third parties would use Searchlight to provide a quick summary of key points. For example Searchlight is frequently used by recruitment consultants.

Back to top


Leading Edge

Description

The Leading Edge report is designed to indicate the optimal management style that is required to work best with the respondent. As such it is a guide for the respondent's manager rather than the respondent him/her self. Leading Edge uses the same Leadership Structure found in the Strategic Leadership Review. It is broadly based on work by Bass, Alvolio and Quigley and differentiates between Transactional Leadership (managing people to reach agreed goals) and Transformational or Visionary Leadership (inspiring people to go above and beyond expectations). These domains are defined as follows:

Transformational/Visionary Leadership
V1:Creating a Vision

Visionary leaders are described as motivating, inspiring and convincing. A vision cannot be established by edict. To ensure colleagues "buy in" to a vision you must persuade, excite and influence. People who do this well, communicate a sense of purpose and focus, make people feel they understand where the organisation is going, enthuse and motivate people about what can be achieved, appear passionate and committed to the work, and look to the future with enthusiasm.

V2:Intellectual Stimulation

Such people who do well are able to provide a positive and challenging environment for other. They make people think and re-examine their ideas and look for alternatives. They quickly see new applications and ways forward, are innovative and imaginative, are seen as experts and authorities in their fields, and are aware of trends and developments in their fields.

V3:Individual consideration

This means creating an environment where people feel valued and encouraged to contribute, where they can explore their own talents and utilise individual strengths. People who enable others to do this are seen as positive and fair minded. They ensure justice and are not judgmental. They are attuned to the feelings and natures of their colleagues and show respect for them. Such people can establish a positive environment for each person in the team, get people to contribute in the way they work best, allow for individual differences, do not pre-judge people or impose their own prejudices. They are accessible and responsive to others needs. They accept people for what they are.

Transactional Leadership
T1:Goal Setting

Goals are the operationalisation of a corporate vision. They are the engine of activity, which provides a specific, practical focus for efforts. Goals need to be specific to ensure clear direction. They must be measurable so people know whether they are being met. They must be achievable since an unrealistic goal is de-motivating. They must be relevant so they convey a realistic sense of purpose and they need a time limit to crystallise them and provide an agreed end point.

T2:Performance Monitoring

There is little point in setting clear goals if no effort is made to determine whether they have been met. Performance review can be very structured with centralised administration or more fluid relying more on the individual than the system. This helps a person to understand whether the goals have been achieved. The process for monitoring, the frequency of review and the individual responsibility for this review needs to be made clear.

T3:Feedback

Performance appraisal is a normal part of corporate life now. Feedback is designed to answer two questions: What are we expecting and "How are we doing? And for feedback to be effective it must be: Understood, Believed and Accepted

T4:Developing Careers

The key to developing others is to demonstrate genuine interest and concern for them. It involves selflessness and a willingness to put others first. In order to achieve this you need first to understand yourself and, following that, understand the needs, interests and desires of other people. To be effective you need to also understand the political and organisational sensitivities that exist. Introducing Facet5 raises the power of an interview considerably. Although many organisations now use personality questionnaires as part of the selection process, it is most powerful when it is used early. Therefore it is important to explain to candidates why they are being asked to fill in a questionnaire and the place it will take in the whole process.

Each commentary is provided as bullet points. Each statement is designed to provide a guide to specific behaviours that are likely to encourage that aspect of a sub-ordinate's performance. For example where Control is high and the manager needs to set objective it will recommend taking a thorough and careful approach, provide background and address the details. Where Control is low the Leading Edge report will suggest a more free wheeling, unstructured approach.

Leading Edge uses the Facet5 family structure so there are 17 different management/leadership strategies on offer.

A sample of this report can be seen here.

Media - Integrated Text and Graphics

Leading Edge shows the overall Facet5 Profile (without sub-factors) and, for comparison, the reference profile for the "Family" to which the respondent has been assigned. Text is provided in bullet form for clarity.

Complexity

The whole report is based on a pattern analysis of the Facet5 Profile and a subsequent linking to the Facet5 Families. All text therefore relates to the assigned family.

Report structure

The report is construct-based under the headings mentioned above.

Sensitivity to context

There is one version of Leading Edge designed to provide a guide to managing/leading.

Clinical-actuarial

The written content of the Facet5 report was created over a period of time by the authors with considerable support from peers and colleagues. They are therefore "clinical judgement" by a group of experts.

Modifiability

The .pdf's are not easily modifiable (although they can be with appropriate software). However the web based data is presented as pure HTML and is therefore completely modifiable or editable if required by users with an appropriate level of access.

Degree of 'finish'

Facet5 reports (as .pdfs) are designed to be "publication" quality. With appropriate quality colour printing they are ready to be bound and presented. Obviously the .pdf itself can be transmitted electronically to the point of delivery.

Transparency

The content of Leading Edge is based on the Family structure structured around the Leadership dimensions. Fully trained Facet5 users will be completely familiar with the source of the report commentary. A manager does not need to fully understand the relationship between the comments and the underlying Facet5 profile but will obviously do a better job it they do. A respondent will need to have these links explained to them during feedback.

Style and tone

Leading Edge is both descriptive and provides guidance.

Intended recipients

Qualified instrument users tend to use parts of the Leading Edge to help structure the "How to Manage" section of a written report. The leadership competencies are generic but are frequently found in organisation's leadership structures so may require little modification to fit.

Qualified system users use the report as is and construct an management/leadership strategy around the Leading Edge guidelines.

Test takers can use Leading Edge as a guide to their own leadership requirements.

Third parties (managers/leaders) would use Leading Edge to provide a reference so they can adjust their leadership style to make it more "person specific". Leading Edge is predicated on the efficacy of a dyadic leadership style.

Back to top


Work Preferences

Description

The Work Preferences report grew out of research where responses were obtained using a 100 item "Work Elements" questionnaire originally based on Schein's "Career Anchors" concept. The principal behind it is that of all the different "work elements" embedded in people's daily activities some will be more appealing than others. This questionnaire attempted to identify and categorise these Elements" into broader "Anchors".

We also had parallel Facet5 data for the sample and it was the analysis of the relationship between the two that produced the "Work Preferences" report. For example people with high Will stated that they preferred roles where they were able to influence events and take important decisions. High Control people saif they wanted respect and a logical structure to their work. High affection people said they wanted to help and to feel they were making a difference to people's lives.

The constructs underlying the correlated elements were closely related to a number of different motivational constructs. Will seems related to needs for "Power". Affection links to a need for "People" and Control links to a preference for "Process". Energy clearly linked to "Participation" with its emphasis on involvement and activity.

A sample of this report can be seen here.

The Work Preferences Report takes these constructs and combines them to give firstly an overview of the pattern of motivations as they might relate to work roles. It then goes on to list work elements likely to prove "motivating" and elements likely to prove "de-motivating".

Work Preferences uses the Facet5 family structure so there are 17 different Work Roles and sets of motivational elements on offer.

Media - Integrated Text and Graphics

Work Preferences shows the overall Facet5 Profile (without sub-factors) and, for comparison, the reference profile for the "Family" to which the respondent has been assigned. Text is provided in bullet form for clarity.

Complexity

The whole report is based on a pattern analysis of the Facet5 Profile and a subsequent linking to the Facet5 Families. All text therefore relates to the assigned family.

Report structure

The report is construct based under the headings mentioned above.

Sensitivity to context

There is one version of Work Preferences designed for use in career development.

Clinical-actuarial

The written content of the Work Preferences report was created over a period of time by the authors with considerable support from peers and colleagues. They are therefore "clinical judgements" by a group of experts.

Modifiability

The .pdf's are not easily modifiable (although they can be with appropriate software). However the web based data is presented as pure HTML and is therefore completely modifiable or editable if required by users with an appropriate level of access to the system.

Degree of 'finish'

Work Preferences reports (as .pdfs) are designed to be "publication" quality. With appropriate quality colour printing they are ready to be bound and presented. Obviously the .pdf itself can be transmitted electronically to the point of delivery.

Transparency

The content of Work Preferences is based on the Family structure structured around the Work Motivation dimensions. Fully trained Facet5 users will be completely familiar with the source of the report commentary. A manager/counsellor does not need to fully understand the relationship between the comments and the underlying Facet5 profile but will obviously do a better job it they do. A respondent will need to have these links explained to them during feedback.

Style and tone

Work Preferences is both descriptive and provides guidance. The list of "job role elements" is descriptive.

Intended recipients

Qualified instrument users tend to use the Work Preferences report to help structure the "Career Development" section of a written report. The "role elements" can be used to help define new roles or to evaluate existing roles.

Qualified system users use the report as a guide to Career Development discussions and workshops.

Test takers can use Work Preferences to either evaluate their existing role or to assess possible future roles.

Third parties (managers/counsellors/coaches) would use Work Preferences to provide a reference so they can provide career guidance and role clarification.

Back to top


Audition

Description

Audition is a structured interview guide produced by Facet5 by aligning a respondent's Facet5 profile (at the sub-factor level) with a reference template or "Ideal" profile. The ideal template can be created in three ways:
  1. Empirical research
  2. Rational analysis
  3. Collective Intelligence
These processes are outlined below:

Audition based on Empirical Research

The most typical application of Audition is for high volume selection processes such as Call Centres. Where the volumes warrant it Audition should be based on a thorough research project designed to provide the specification for the Audition Role Template.

Audition based on Rational Analysis

This approach requires a detailed job analysis. This may be a formal written analysis that has already been prepared but it could also be created from interviews using a Critical Incident or Repertory Grid technique. In either case the steps are:
Audition based on Collective Intelligence

This approach utilises Facet5's integrated multi-rater process. Direct estimates are obtained from multiple raters who are deemed to be "informed" regarding the requirements of the role. The system produces a multi-rater view of the requirements for the role expressed directly as behaviours related to Facet5 sub-factors. When agreed these can be loaded directly to the system to create an Audition template.

A sample of an Audition report can be seen here.

Media - Integrated Text and Graphics

Audition shows the overall Facet5 Profile (without sub-factors) and, for comparison, the "Ideal" profile for the role that has been defined. Respondent scores are shown as "deviation" scores to show graphically where the fit is closest. Text is provided in bullet form for clarity.

Complexity

The report is based on a factor X factor deviation analysis. A convergence chart is used with deviation bars varied by colour and intensity according to closeness of "fit".

Report structure

The report is sub-factor based but the sub-factors have been re-worked to represent work behaviours.

Sensitivity to context

The structure of Audition is fixed as a guide to behavioural interview.

Clinical-actuarial

Audition is a combination of clinical comments driven by actuarial data. Templates can be defined by "clinical" analysis, by actuarial research or by a combination of the two.

Modifiability

The structure of Audition is fixed although the behavioural descriptors, ideal points, interpretative comments, BARS scales and interview questions are when a template is set up. The .pdf's are not easily modifiable (although they can be with appropriate software). However the web based data is presented as pure HTML and is therefore completely modifiable or editable if required by a user with an appropriate level of access.

Degree of 'finish'

Audition reports (as .pdfs) are designed to be "publication" quality. With appropriate quality colour printing they are ready to be bound and presented. Obviously the .pdf itself can be transmitted electronically to the point of delivery.

Transparency

The content of Audition is based on the Audition Template which is in turn based on a 1:1 relationship with the Facet5 sub-factor structure. Fully trained Facet5 users will be completely familiar with the source of the report commentary. A manager/counsellor does not need to fully understand the relationship between the comments and the underlying Facet5 profile but will obviously do a better job it they do. An interviewee would need to have these links explained to them during feedback although we know that in many cases feedback is minimal.

Style and tone

Audition is both descriptive and provides guidance.

Intended recipients

Qualified instrument users tend to use parts of Audition to help structure a behaviour based interview.

Qualified system users use the report as is and construct an interview process around the Audition guidelines.

Test takers can use Audition as an "aide mémoire" of the interview and feedback discussion.

Third parties would use Audition to provide a quick summary of key points. For example Audition is frequently used by recruitment consultants. HR departments can use the Audition guides along with the accompanying notes to provide a written history of the interview process.

Back to top


Strategic Leadership Review (SLR)

Description

The SLR is an extension of Facet5 that integrates multi-rater responses to a Leadership Review with the results of a Facet5 profile. The SLR uses the same Leadership Dimensions as Leading Edge. (click here for definitions) The SLR can work as a normal multi-rater leadership review tool but the integration of Facet5 adds another dimension. Facet5 uses a software integration engine called 3DV to identify those of the 84 defined leadership behaviours where there people with profiles similar to the respondent are likely to receive above average ratings. And, conversely where they are likely to receive below average ratings.

The specific behaviours are then identified in the report and compared to the actual ratings that were received. This provides four possible results.
  1. Natural Skills: a behaviour was predicted to be highly rated and it was.
  2. Latent Skills: a behaviour was predicted to be highly rated but it wasn't.
  3. Barriers or "Not Really You": a behaviour which was predicted to be lowly rated and it was and
  4. Learned Skills: a behaviour which was not predicted to be highly rated but which was.
This type of report is then used as part of the full multi-rater review where the SLR produces a picture of what is actually happening and Facet5 contributes an understanding of "why" it is happening. The integration of the two suggests where development might be most profitably focused.

A sample of an SLR can be seen here.

Media - Integrated Text and Graphics

The SLR does not show the overall Facet5 Profile. Instead it focuses on a representation of the multi-rater data with additional bars and markers for different viewpoints. Results are shown as a simplified "box and whisker" chart. Significant behaviours are colour coded.

Complexity

Although there is a lot of data shown (both the full multi-rater view and the impact of Facet5) the report is entirely empirical. Apart from explanatory text there is no attempt at automatic interpretation.

Report structure

The report uses the Leadership domains as its foundation with representation of the 12 behaviour associated with each domain as well.

Sensitivity to context

The SLR is designed as a support diagnostic for leadership review so is "insensitive".

Clinical-actuarial

The SLR is entirely actuarial. Interpretation is left to the coach or counsellor responsible for the feedback to the target individual.

Modifiability

The .pdf's are not easily modifiable (although they can be with appropriate software). However the web based data is presented as pure HTML and is therefore completely modifiable/editable if required.

Degree of 'finish'

The SLR reports (as .pdfs) are designed to be "publication" quality. With appropriate quality colour printing they are ready to be bound and presented. Obviously the .pdf itself can be transmitted electronically to the point of delivery.

Transparency

Since the core of the report is a graphical portrayal of the multi-rater feedback, much of the output is obvious. The Facet driven links do require explanation but fully trained Facet5 users will be completely familiar with the source of the highlighted items. The SLR is not designed for naive or occasional users but is an in depth tool for experienced coaches. A target manager would need to have these links explained to them during feedback although we know that in many cases feedback is minimal.

Style and tone

The SLR is entirely descriptive.

Intended recipients

Qualified instrument users use The SLR to for leadership development.

Qualified system users use the report as is and construct a coaching process around the SLR guidelines.

Test takers (target managers) can use The SLR as an "aide mémoire" of the feedback discussion and as the foundation of a development plan.

HR departments can use the SLR to support the agreed development processes and, when summarised across a group, as an indicator of training needs.

Back to top


Corrections and Future Developments:

Process for Corrections

All errors with simple solutions are corrected as soon as is practicable after they have been noticed. The web based technology means that there are only a small number of installations to be updated. More complex updates are scheduled approximately every 6 months.

Additions and Future Developments

The following additions and modifications are currently either being researched or are in the process of being programmed into the system:
Back to top


Documentation

Documentation provided with Facet5 includes:


User Manual

A comprehensive manual is provided in an A4, 4 ring binder. Professionally printed with colour cover and sections covering:

Section 1: Origins and Application
Section 2: Introduction and Background
Section 3: Development of Facet5
Section 4: Description of Factors
Section 5: Facet5 Families
Section 6: Selecting for the Job
Section 7: Selecting for the Organisation
Section 8: Work Preferences
Section 9: Leading Edge
Section 10: Preparing for Feedback
Section 11: Using the Facet5 system

Back to top


Technical (psychometric) information

Technical information is provided both in the User Manual and on the web under the heading "Facet5 Live".

Back to top


Facet5 live

Facet5 Live (login 'demo', password 'demo1234') is a section of the Facet5 system which contains a number of case studies and technical summaries of Facet5. This library is dynamic and grows as new research is added. At present the list includes:

Customer Service Validation

A major call centre was looking to reduce staff turnover and increase productivity. A Facet5 Audition profile showed how to double the selection success rate and focus interviews on key areas. Click here for the report.

Response Patterns and Impression Management

Presentation to the International Test Commission Conference in Winchester, UK June 2002.
To view this paper click here.

The Magic Number 5

In spite of the millions spent and the thousands of studies, the occupational psychology profession still has not developed a cohesive language or body of knowledge. While it is unlikely that we are going to discover laws as immutable as Bernoulli, Ohm or even Heisenberg in the near future, there are developments which may provide the sort of underpinning which organisations are seeking.

Case Study 1 - Successful Accounting

Graduate applicants to a large firm of Chartered Accountants were given Facet 5.0 during the selection stages as part of the selection process.

Case Study 2 - Retailing Differences

A major high street retailer used Facet as part of a management training programme. Respondents were 36 department managers in stores from around the UK.

Case Study 3 - Culture Clash

The following study took place in an investment bank, and came about as a result of complaints about a team of investment bankers. This team was comprised of the international investment bankers based in New York and their style of operation was being poorly received by other banking functions.

Case Study 4 - Managing Relationships

Derek, an employee of an investment bank, and Bob, his manager, were complaining about each others performance to such a degree that intervention was requested by the manager.

Case Study 5 - Commercially Centred

A large recently privatised science and technology company aims to recruit 10-12 future managers from the graduate population every year. Redfield were commissioned to design, and implement an assessment centre to select individuals for these management roles.

Case Study 6 - Getting a Head

A large, aggressive commercial organisation wished to employ a new head of Human Resources. The organisation wanted someone with a supportive, more conciliatory and approachable style than the previous incumbent. The final candidates were assessed in a process that included the use of Facet.

Case Study 7 - Culture Shots

One of the many applications of Facet is its ability to provide pictures of cultures, from the whole organisation through to teams within the organisation.

Case Study 8 - A Question of Sex

Attraction-Selection-Attrition theory suggests that samples drawn from within individual organizations may be biased by the nature of the organisation itself. So does the data used by Facet show up inconsistencies between the sexes because of these biases?

Case Study 9 - Reliable Results

A profile like Facet is only useful if the information it gives is generally reliable. If a person completes the questionnaire a second time will they come up with the same scores (broadly). More importantly will the results be interpreted in broadly the same way and would similar conclusions be drawn?

Case Study 10 - When I grow up I want to be a ...

This study looks at the relationship between Facet5 and Career Anchors. Career Anchors are the factors a person tends to consider when making career decisions. The findings from this research form the underpinning for the Facet5 Work Preferences report.

Back to top


Method of publication.

Facet5 is designed to be run live on the internet. Access is via USERID and PASSWORD. Data flow is encrypted. Facilities exist for capturing and processing paper based responses but this is discouraged since it stops the use of Response Latency Analysis as a method of Impression Management.

Back to top


Costs

The cost structure for Facet5 is simple. There is a single accreditation charge (see below) and then a charge is incurred when a profile is processed and loaded to the system. Once loaded to the system now further charges are incurred for that profile. Reports may be produced at will as long as the account remains active.


Accreditation

Facet5 start-up costs are included in the cost of accreditation. While these costs may vary from one country to another, the accreditation costs for Facet5 in the UK is £500 per person for a 2-day accreditation.

As part of the accreditation an account is created which is tailored to reflect the client organisation's look and feel. Access to this account is provided via secure USERID and PASSWORD. Users are encouraged to change the PASSWORD immediately to something more secure and meaningful to them.


Recurrent costs.

There are no annual license fees for Facet5. Recurrent costs are linked to profile usage. The current UK prices for Facet5 are as follows:

Quantity of Profiles Price per profile
1 to 50 75.00
51 to 100 72.00
101 to 200 68.00
201 to 500 60.00
501 to 1000 55.00
1001 to 2000 52.00
2001+ 50.00
Bureau rpts ** 20.00

For prices in other countries please contact the relevant distributor.

Prices for reports

There are no additional charges for Facet5 reports. A single charge is incurred when the data is processed and loaded to the database. All subsequent reports are available within that charge as long as the account remains active.


Bureau services

Where there is a request for bureau processing the following charges are applied:

(colour) are: plus

** Colour report reprints are £20

** pdf files are £10

Back to top


Instrument-related qualifications

Facet5 is supplied solely to people who have been accredited by Redfield Consulting or one of its authorised distributors. The agenda for the standard accreditation process can be seen here.

The Standard Accreditation is not designed to qualify people to Level B of the BPS standard. However an extended accreditation is available should people wish to be trained to that level.

Accreditation programmes are mostly run "in-house" and are frequently modified somewhat from this standard. This enables us to focus more closely on the specific applications relevant to that organisation.

For people who are already qualified to a high level in other instrumentation (for example Level B qualification), a Professional accreditation can be delivered.

For details of the accreditation process you should contact the Facet5 distributor in your region.

Back to top


Professional qualifications required

It is not essential for users to be qualified psychologists. However we do prefer users to be experienced practitioners in a relevant related profession.

Redfield reserves the right to refuse to supply Facet5 to people it does not believe have the professional skills to use it or to withdraw supply from people who use it contrary to the Code of Practice laid down by their relevant professional body. In the absence of a local Code of Conduct we would refer to the Code of Conduct laid down by the British Psychological Society.

Back to top


General description of the instrument

Facet5 was developed in the early 1990's. It is a web-based normative Big 5 questionnaire that produces scores on 5 main factors, 13 sub-factors and also assigns a profile to a "Facet5 Family" to produce a pseudo "type". It is available worldwide in a number of key languages. It consists of 106 questions in a semantic differential format. This combined with the use of natural language makes it quick and easy to complete.

All scoring is automatic and instant with fully formatted, professional quality reports immediately available from the system in .pdf format. It includes an innovative approach to identifying Impression Management where it occurs which is specifically designed to work with web administration.

Focus in Facet5 is on the practical application of the personality data rather than the scores themselves. Reports are keyed to support HR decisions in Selection, Integration to a team, Management and Development.

Facet5 is constantly developing. Further translations are underway into, for example, Mandarin and Spanish. Further extensions will strengthen Facet5 by adding other sources of information and integrating them into the interpretation. This will add to the tools made available through Facet5 to HR professionals, Psychologists and Consultants.

Back to top


Norms

The Facet5 questionnaire was developed for the "Managerial and Professional" groups. The norms therefore relate specifically to those groups. The database is a dynamic and rapidly growing one and currently contains in excess of 19000 profiles.

Norms available to the user are:


Original Development Sample:

This sample was collected as part of the original development process and was made up of 693 cases. They were predominantly Male (67%), 90% under 40 year of age and 75% educated to A'level or higher.


British Manager Sample

Norms are based on a sample extracted from over 4600 members of the British working population. Approximately 35% of the sample was female, 65% male. Ages are: <= 25 - 21.5%, 26-35 - 42.0%, 36-45 - 26.3% and >45 - 10.2%


English Speaking Sample - paper based

This sample includes only people who completed Facet5 using the original paper and pencil format. Sample structure was:

Admin Method Missing Female Male Total
Paper & Pencil 549 3877 7746 12172
Proportion 4.5% 31.9% 63.6% 100.0%


English Speaking Sample - web based

This includes only people who completed Facet5 using web-based administration. Sample structure was:

Admin Method Missing Female Male Total
Paper & Pencil 401 2529 3530 6460
Proportion 6.2% 39.1% 54.6% 100.0%


English Speaking Sample - combined administration methods

This sample combines the data from both administration methods. Sample structure was:

Admin Method Missing Female Male Total
Paper & Pencil 950 6406 11276 18632
Proportion 5.1% 34.4% 60.5% 100.0%

Note: Analysis of the differences due to administration method showed little significant difference so we would recommend using this larger sample where possible.


English Speaking - Male

These norms are for 11276 males who completed Facet5 using either paper based or web based administration.


English Speaking - Female

These norms are for 6406 females who completed Facet5 using either paper based or web based administration.

Note: Analysis of the differences due to gender showed little significant difference so we would recommend using the larger combined sample where possible.


National Norms - English version

Where the same questionnaire is used we will prepare local norms. The first place where this happened was Australia and Australian norms have been available for some years now. Norms for the USA and NZ are currently being established.


Australian Manager Sample #1

A sample of 1850 Australian managers and professionals. 30% female, 70% male. Average age 38. Age range 20 - 72. Mostly applicants for jobs in Australia.


Australian Manager Sample #2

A similar sample to above but with over 6000 cases of data. All completed Facet5 on-line in the period from November 2000 to July 2004.

Admin Method Missing Female Male Total Australian 253 2258 3831 6342


Translated National Norms

As Facet5 is translated and implemented around the world, it is obviously important that we have relevant norms for that region. Since this is an ongoing process (new language versions of Facet5 are being added regularly), it is clear that we need to have a standardised process for norm creation so that the norms for Brazil in Portuguese are comparable with the norms for Denmark in Danish. Such a process is in place.

When a Facet5 is implemented in a new area, whether or not it involves a translation, we collect data according to a stratified sample. The sample includes equal numbers of men and women from 12 different job functions. The sample structure is as follows:

  National Norm Structure
Job Function  
Administration People involved in the "back office" functions of an organisation. They will include clerks, administrators, secretaries, receptionists. They are not function specific - they could come from purchasing, despatch or sales admin for example.
Consultant People providing a professional intellectual service to other organisations. They will usually have a professional qualification (logistics, psychology, IT or similar) but the critical point is that they use this expertise to provide solutions or services.
Finance This will include all professionally qualified people in the finance field from Finance Directors and CFO's to accountants.
HR/Personnel This includes HR Directors and similar as well as functional HR staff such as recruiters, trainers and learning and development specialists.
IT All people involved in the development, implementation and support of IT systems. Usually professionally qualified.
Marketing Includes market research, market planning, product managers and advertising specialists.
Operations People involved in running the supply chain side of the business. It would typically include logistics, warehousing, manufacture and distribution. Purchasing could be included here although in some organisations it is more of a finance function.
Sales All people involved in presenting the company and its products directly to the end user. It includes sales representatives, sales managers and team leaders. It would not include sales administrators.
Scientist People with a defined scientific discipline. They may work in research (e.g. genetics) or in an applied field such as product or process development
Technical Includes engineering and other trades. Typically people in construction and maintenance.
Contact Centre - Outbound People who conduct a sales activity entirely by telephone. It is outward focused requiring initiative and pro-activity. They may create appointments for other sales people or actually conclude a sale.
Contact Centre - Inbound People who provide information by phone in response to specific queries. They are usually script based and are more reactive.

It should be noted that this sample is not designed to fully represent the full range of functions in the working population. It is purely to provide a reference base against which new samples can be measured where function variance has been reduced as much as possible. The intention is to enable us to identify genuine population differences where they exist.

Norms based on this process are currently available for Denmark and will be available for the US, Singapore and Brazil by the end of 2004. Our intention is to provide highly relevant local norms which are broadly comparable across international boundaries.


Danish Norms

Created using the National norm model, these norms are approximately 70% male, 30% female. They all completed the questionnaire in Danish. They are predominantly professional and managerial respondents from a range of job functions in Danish industry. Selected from a number of different Danish Companies they broadly represent the target group for the Danish translation of Facet5. Due to the large sample sizes we applied Cohen's Effect size calculations to determine the impact of any differences.

Danish data Other data Cohen's d
N Mean SD N Mean SD
Will 230 47.86 7.96 18655 46.70 7.23 0.04 negligible effect
Energy 230 52.83 7.44 18655 52.75 7.67 0.29 small effect
Affection 230 63.92 8.23 18654 64.08 9.04 0.15 small effect
Control 230 61.40 8.51 18655 59.71 9.26 0.49 medium effect
Emotionality 230 51.41 9.79 18655 45.96 9.50 0.13 negligible effect


Brazilian (Portuguese) Norms

These norms are based on a sample of 716 people employed by Brazilian companies. They included a significant number who were attending MBA programmes at Brazilian educational institutions. Due to the large sample sizes we applied Cohen's Effect size calculations to determine the impact of any differences.

Brazil data Other data Cohen's d
N Mean SD N Mean SD
Will 716 46.98 8.00 18655 46.70 7.23 0.16 small effect
Energy 716 50.53 7.94 18655 52.75 7.67 0.01 negligible effect
Affection 716 62.74 9.29 18654 64.08 9.04 0.02 negligible effect
Control 716 55.19 8.29 18655 59.71 9.26 0.18 negligible effect
Emotionality 716 47.17 9.84 18655 45.96 9.50 0.57 medium effect

As can be seen there were only negligible to small effects on all factors with the exception of Emotionality where there was a medium effect. However we would urge caution in the interpretation of this data since the Brazilian people all completed Facet5 in Portuguese whereas the balance completed the questionnaire in English. While great care was taken to ensure the translation replicated the concepts and not just the words used, we cannot be certain that part of this difference is not due to translation effects rather than genuine population effects.


Chinese (Mandarin) Norms

Data for these is currently being collected.


German Norms

Data for these is currently being collected.


Hungarian Norms

Data for these is currently being collected.


Spanish Norms

Data for these is currently being collected.


Welsh Norms

Data for these is currently being collected.


Industry Sector Norms

Although data has been collected in an opportunistic manner, it has been possible to post-code a number of the profiles into broad industry sectors. As a result a certain number of Industry Sector norms are available as follows:

Sector N
Information Technology 3529
Manufacturing 2327
Public and Community Services 1714
Financial Services 1343
Pharma 807
Banking 566
Professional